Hard-n-Fast Racing Products, Inc.

​TURCK - Versa Fast receptacle BFK-6-6-1

Female receptacle for 6 conductor BSM 6-085-2 cable. Flush mount finish with 1 meter of flying leads.  


​Fluid Temperature Sensor

1/8" NPT fluid temperature sensor measuring -40 to 125c Or -40 to 257 degrees fahrenheit. High quality sensors made by Texense 


​TURCK - Versa Fast multi-cable BSM 14-998-2
2 meters in length, male connector on one end and flying leads on other. Sunlight resistant 14 conductor 22 AWG rated for 3 amp load. Perfect for relay control wiring projects. Works great for multi switching relay applications. 


20 Pole fused termination block


Yeah we know, nothing simple or cheaply made. Sure you can but-splice or screw and tape wires together. By why settle for lame when you can have craftsmanship! Made with billet aluminum base plate (black shown with 3d print materials), welded and power-coated aluminum cover. Use connector or grommets for wire support and terminate independent 5 amp loads and wire terminations for sensors, switch legs and other misc. connections. 18 feed through poles with fused protection and 2 poles intended to illuminate blue LED when power is present. Use HNF Relay boards with HNF Racing cables by TURCK and tie in toggle switches or other misc controls. A great way to have a clean termination and to troubleshoot situations.


***Product availability coming soon***

​Fluid or Air Pressure Sensor

DASH3 0 - 150 psi sensor measuring 0-5v signal and 600mm flying leads.  High quality sensors made by Texense 


​TURCK - Versa Fast receptacle BFK-14-14-1

Female receptacle for 14 conductor BSM 14-998-2 cable. Flush mount finish with 1 meter of flying leads.  


HNF01B - relay board

Product comes with:

  • HNF Relay Board with 4 relay sockets
  • (4) mounting insulators
  • (4) mounting bolts
  • ​$58.00 each plus shipping

​TURCK - Versa Fast multi-cable BSM 6-085-2

2 meters in length, male connector on one end and flying leads on other. Sunlight resistant 6 conductor 18 AWG. Perfect for relay control wiring projects. Works great with our HNF 4 Relay Boards! 


HNF01B-P-B - KIT

These HNF relay boards  were made to simplify your relay wiring projects. No more but-connectors, stake on's, fuse blocks, or wasted time with wiring your custom project. Simply wire with up to 100 amps of peak power cable from the positive side of the battery, constant ground, signal wire and (4) grounds or positive low amperage switch signals and you're DONE!

*NOTE all boards are manufactured with negative triggers. Please specify if you need positive triggers and we will modify the board for you. Either select all negative or all positive triggers. 

Control 4 loads up to 30 amps each and withstands 100 peak amps or 75 amps continuous.  See Video below for display @ SEMA.

Product comes with:

  • HNF Relay Board with 4 relay sockets
  • Relay board mounting plate. Fabricated from steel and powder coated near chrome
  • Relay box cover. This allows to cover your controls to assist with dust and damp locations. Best for off-road applications.
  • (2) 25 amp fuses
  • (2) 20 amp fuses
  • (4) 15 amp fuses
  • (4) 10 amp fused
  • (4) wire ties
  • (4) 30 amp sealed relays
  • HNF screw driver
  • $125.00 each plus shipping

​TURCK - Versa Fast multi-cable BSM 19-995-2
2 meters in length, male connector on one end and flying leads on other. Sunlight resistant 19 conductor 22 AWG rated for 3 amp load. Perfect for relay control wiring projects. Works great for multi switching relay applications. 


HNF partnering in Temp and Pressure sensors with Texense

Hard-n-Fast Racing Products, inc. HNF Automotive Wiring Touch Surface Relay Switching and Engine Monitoring Control Systems

​TURCK - Versa Fast receptacle BFK-19-19-1

Female receptacle for 19 conductor BSM 19-995-2 cable. Flush mount finish with 1 meter of flying leads.  


HNF employs multi-cable assemblies with TURCK

Hard-n-Fast Racing Products store is coming soon. We are also working on some new products to be featured!


Interested in being an HNF vendor? Contacts us!


Meanwhile we have provided you with some simple paypal purchase options.

TURCK cables are industrial cable assemblies used for high vibration industrial control applications. We use them for the quality and ease of connecting multiple control and monitoring connections. While providing high quality and very reliable low amperage signals, they dress up your wiring projects with an impeccable look and feel. VERY professional and just plain COOL!

PRICING AND AVAILABILITY COMING SOON!

Learn a little more about this product.

HNF01B-P - relay board and plate

Product comes with:

  • HNF Relay Board with 4 relay sockets.
  • Relay board mounting plate.
  • Wiring grommets 
  • $76.00 each plus shipping

A few of our HNF hats. More wear and tear on the way

HNF01B-P-B - relay board, plate and box cover

Product comes with:

  • HNF Relay Board with 4 relay sockets.
  • Relay board mounting plate.
  • Aluminum box cover
  • Wiring grommets 
  • $95.00 each plus shipping